2009 Mercedes R-Class Owner's Manual - Page 220

Controls in detail Loading and storing Installing the cargo net Pulling the cargo net tight 1 Holder behind B-Pillar 2 Holder behind C-Pillar RWith the cargo volume expanded in part (Y page 210), use holders behind C-pillars 2 and the cargo tie-down rings in the thirdrow footwell (Y page 209). Cargo net installed behind the C-pillar 1 Holder 2 Cargo net bar 3 Cargo net bar X X X Belt hook attached in the third-row footwell 1 Belt hook 2 Cargo tie-down ring 3 Tightening belt X X RWith the cargo volume fully expanded (Y page 211), use holders behind B-pillars 1 and the cargo tie-down rings in the second-row footwell (Y page 209). Open the hook and loop fasteners on the cargo net package. Roll out the cargo net. Unfold the cargo net. Engage the lower cargo net bar. The cargo net bar must engage audibly. Hang cargo net bar 2 on holder 1 as indicated by the arrow. Push cargo net bar 2 forward into holder 1 in direction of arrow. Engage cargo net bar 3. The cargo net bar must engage audibly. Hook belt hook 1 into cargo tie-down ring 2 in direction of arrow. Pull tightening belt 3 by the loose end in direction of arrow until the cargo net is pulled tight. After driving a short distance, make sure the cargo net is still tight and, if necessary, pull it tight again. X X X X X 218