1999 Nissan Pathfinder Owner's Manual - Page 139

TUNE (Tuning): select AM, FM1, or FM2. The selected band illuminates in the display. 2. Tune to the desired station. 3. Push the desired select button for more than 2 seconds. For example, in the illustrations ch2 is to be memorized. The radio mutes when the select button is pushed. 4. When the sound resumes, memorizing is complete. 5. Other station select buttons can be set in the same manner. If the battery cable is disconnected, or if the radio fuse opens, the radio memory is cancelled. In that case, reset the desired stations. The radio should not be tuned while driving in order that full attention may be given to the driving operation. Push either manual tuning button . SEEK/SCAN tuning: Push the SEEK/SCAN tuning button for less than 1.5 seconds. SEEK tuning begins from low to high frequencies and stops at the next broadcasting station. Pushing the button again continues the SEEK function. Once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcast station. Push the SEEK/SCAN tuning button for more than 1.5 seconds. SCAN illuminates in the display window. SCAN tuning begins from low to high frequencies and stops at each broadcasting station for five seconds. Pushing the button again during this five second period stops SCAN tuning and the radio remains tuned to that station. or Cassette tape player operation Turn the ignition key to ACC or ON, then carefully insert a cassette tape into the tape door. SAA0259 Station memory operations: Six stations can be set for the AM band. 12 stations can be set for the FM band (six for FM1, six for FM2). 1. Push the FM⋅AM band select button to The cassette tape automatically pulls into the player. The word TAPE and moving digital squares illuminate on the right side of the display window. 4-16 Heater, air conditioner and audio systems