2005 Nissan 350Z Owner's Manual - Page 21
2005 Nissan 350Z Manual
Page 21 highlights
switch" later in this section.) ¼ when the passenger seat belt is fastened. ¼ when the vehicle speed reaches 4 MPH (7 km/h) and more. The automatic tilting/reclining movement will be stopped: ¼ when any of the above 4 conditions occur. ¼ when the power seatback tilt switch (top or bottom) is pushed again. ¼ when the seatback is moved with the soft top open/close operation. back side of the passenger seatback as shown. Tilting/reclining operation: Roadster models (power type) B The power seatback tilt switch k and the C seatback tilt cancel switch k are located on the Roadster models - Type A SSS0273 seatback tilt switch. While the switch is held down, the seatback will move backward to the original position that was last selected using the reclining switch (located on the seat cushion). Release the switch to stop the movement. Operation conditions: The power seatback tilt switch does not activate under the following conditions. ¼ when the passenger seat sliding/reclining switches on the seat cushion are being operated. ¼ when the seat tilt cancel switch is in the CANCEL position. (See "Seatback tilt cancel Roadster models - Type B SSS0274 When this interruption occurs, you cannot move the seatback backward from the stopped position with the power seatback tilt switch. Use the reclining switch (on the seat cushion) to select the seatback position. To tilt the passenger seatback forward, push the side) of the power seatback tilt top ( B switch k for more than 0.5 seconds. The seatback will automatically tilt forward. To stop the movement, push the top or bottom of the switch. To tilt or adjust the seatback backward, push and hold the bottom ( side) of the power 1-8 Safety - Seats, seat belts and supplemental restraint system