2009 Nissan cube Owner's Manual - Page 149

3. Turn the fan speed control desired position. dial to the Cooling: This mode is used to cool and dehumidify the air. 1. Push the air recirculation button to switch to the outside air circulation mode. (The indicator light turns off.) 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the Dehumidified heating: This mode is used to heat and dehumidify the air. 1. Push the air recirculation button to switch to the outside air circulation mode. (The indicator light turns off.) 2. Turn the air flow control dial to the position. 3. Turn the fan speed control desired position. dial to the 4. Turn the temperature control dial to the desired position. Heating and defogging: This mode heats the interior and defogs the windows. 1. Turn the air flow control dial to the position. 2. Turn the fan speed control desired position. dial to the 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position. . For quick cooling when the outside temperature is high, push the air recirculation button to switch to the air recirculation mode. (The indicator light turns on.) Be sure to push the air recirculation button to the OFF position for normal cooling. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. 3. Turn the temperature control dial to the desired position. With air conditioner system: When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pressed or the fan control dial is turned to off. 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position. Dehumidified defogging: This mode is used to defog the windows and dehumidify the air. 1. Turn the air flow control dial to the position. 2. Turn the fan speed control desired position. dial to the . Air conditioner operation (if so equipped) The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication. 3. Turn the temperature control dial to the desired position. When the position is selected, the air Heater, air conditioner, audio and phone systems 4-5