2009 Nissan cube Owner's Manual - Page 198

1. Move the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key. If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed. 1 There is an OFF position * between the LOCK and ACC positions, although it is not marked on the ignition switch. STEERING LOCK To lock steering wheel 1. Turn the ignition switch to the LOCK position. 2. Remove the key. 3. Turn the steering wheel 1/6 of a turn clockwise from the straight up position. To unlock steering wheel 1. Insert the key into the ignition switch. 2. Gently turn the ignition switch while rotating the steering wheel slightly right and left. SSD0503 MANUAL TRANSMISSION (MT) The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. To turn the ignition switch to the LOCK position from the ACC or ON position, turn the key to the OFF position, push the key in, then turn the key to the LOCK position. 1 There is an OFF position * in between the LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. KEY POSITIONS LOCK (0) The key can only be removed from the ignition switch at this position. The steering lock can only be locked at this position. OFF (1) The engine is turned off with the steering wheel unlocked. ACC (2) The electrical accessory power activates without the engine turned on. 5-8 Starting and driving