2009 Nissan cube Owner's Manual - Page 81

Average fuel consumption (mpg or l (liter)/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the trip computer A mode switch * for approximately 1 second. The display is updated every 30 seconds. At about the first 1/3 mile (500 m) after a reset, the display shows "---". consumption, average speed, elapsed time and trip odometer (TRIP B only) displays will be reset at the same time. returns to the previous mode and the new interval is set. If the interval distance is set to 0, the display will skip the maintenance information when the ignition switch is placed in the ON position. Maintenance information (Canada only) When the ignition switch is placed in the ON position, maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. The wrench symbol appears when the set distance comes for changing an item, such as engine oil. To set the distance to change an item: 1. Place the ignition switch in the ON position. A Push the trip computer mode switch * for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start flashing and the display shows the current interval. Average speed (mph or km/h) The average speed mode shows the average vehicle speed since the last reset. Resetting is done by pushing the trip computer mode switch A * for approximately 1 second. The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows "---". Elapsed time (Canada only) The elapsed time mode shows the time since the last reset. The displayed time can be reset A by pushing the trip computer mode switch * for approximately 1 second. 2. Push the switch distance. A * to increase the interval Resetting displays When the average fuel consumption, average speed, elapsed time or TRIP B is displayed, A push the trip computer mode switch * for longer than 3 seconds. The average fuel Each step increases the interval distance by 1,000 km (500 miles). The interval distance can be set up to 30,000 km (18,000 miles) after the display returns to 0 (zero). 3. If no further action is made, the display Instruments and controls 2-9