2009 Nissan cube Owner's Manual - Page 205

CAUTION . When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. Do not downshift abruptly on slippery roads. This may cause a loss of control. WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the ignition switch is placed in the OFF or ACC position for any reason while the selector lever is in any positions other than the P (Park), the ignition switch cannot be placed in the LOCK position. If the ignition switch cannot be placed in the LOCK position, perform the following steps: while depressing 1. Apply the parking brake when the vehicle is stopped. 2. Place the ignition switch in the ON position while depressing the foot brake pedal. 3. Move the selector lever to the P (Park) position. 4. Models with Intelligent Key system: Place the ignition switch in the OFF position. Models without Intelligent Key system: Place the ignition switch in the LOCK Starting and driving 5-15 . SSD0862 Shifting To move the selector lever, : : Push the button the brake pedal. Push the button A * A *. : Just move the selector lever. After starting the engine, fully depress the brake pedal, push the selector lever button and move the selector lever from the P (Park) position to any of the desired shift positions.