2009 Nissan cube Owner's Manual - Page 151
2009 Nissan cube Manual
Page 151 highlights
3. Push the temperature control , button to set the desired temperature. The temperature range is between 608F (188C) and 908F (328C). 4. To set the automatic control mode, perform one of the following operations. . When the outside air circulation mode is on, push and hold the outside air circulation button for more than 1.5 seconds. When the air recirculation mode is on, push and hold the air recirculation button for more than 1.5 seconds. 3. Push the temperature control , button to set the desired temperature. The temperature range is between 608F (188C) and 908F (328C). . Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly. If the windows fog up, use dehumidified heating instead of the A/C off heating. ging performance. Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the OFF button. Fan speed control: Turn the fan speed control adjust the fan speed. Air flow control: Push the MODE button to change the air flow mode. - Air flows from the center and side ventilators. - Air flows from the center and side ventilators and foot outlets. - Air flows mainly from the foot outlets. - Air flows from the defroster outlets and foot outlets. Temperature control: Push the temperature control to set the desired temperature. , button , dial to . . Dehumidified defrosting/defogging: 1. Push the front defroster indicator light will illuminate.) button. (The When setting the automatic control mode, both indicator lights will blink twice indicating that the system is in the automatic control mode. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Heating (A/C off): 1. Push the AUTO button. (The AUTO indicator will be displayed.) 2. If the A/C indicator light illuminates, push the A/C button. (The A/C indicator light will turn off.) 2. Turn the temperature control , button to set the desired temperature. . To remove moisture or fog on the front window quickly, set the temperature to the high temperature and the fan speed to their maximum level. After the windshield is cleared, push the front defroster button again. (The indicator light will turn off.) When the front defroster button is pushed, the air conditioner will automatically turn on to defog the windshield. The outside air circulation mode will be selected to improve the defog- . . The temperature range is between 608F (188C) Heater, air conditioner, audio and phone systems 4-7