2013 Nissan cube Owner's Manual - Page 212

IGNITION SWITCH (models without Intelligent Key system) GUID-FA87BF20-6BA6-4446-BC33-BC2CC934B404 WARNING Never remove or turn the key to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. When the ignition switch cannot be turned to the LOCK position: 1. Move the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key. If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed. 1 There is an OFF position * between the LOCK and ACC positions, although it is not marked on the ignition switch. SSD0392 CONTINUOUSLY VARIABLE TRANSMISSION (CVT) GUID-2AEB1133-5A40-47D4-AE94-7EA3936E01D8 The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. . When turning the ignition switch to the LOCK position, make sure that the selector lever is in the P (Park) position. When removing the key from the ignition switch, make sure that the selector lever is in the P (Park) position. . 5-8 Starting and driving