2013 Nissan cube Owner's Manual - Page 261
2013 Nissan cube Manual
Page 261 highlights
Temperature GUID-4B539F4D-3A46-4C7D-AFA6-EF92D4A59D32 A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. . Remove dirt with a vacuum cleaner. Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them. Air pollution GUID-2F70EBEE-0E87-4846-9E1A-31FB39043C42 Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces. TO PROTECT YOUR VEHICLE FROM CORROSION GUID-EE67B79E-2BEA-4F88-B5CA-DECF46876473 ...Wash and wax your vehicle often to keep the vehicle clean. Always check for minor damage to the paint and repair it as soon as possible. Keep drain holes at the bottom of the doors open to avoid water accumulation. Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible. Chemicals used for road surface deicing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders. In winter, the underbody must be cleaned periodically. For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer. CAUTION . NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose. Appearance and care 7-7