2013 Nissan cube Owner's Manual - Page 41
2013 Nissan cube Manual
Page 41 highlights
"Lower Anchors and Tethers for CHildren System (LATCH) " (P.1-23). If you do not have a LATCH compatible child restraint, the vehicle seat belts can be used. Several manufacturers offer child restraints for infants and small children of various sizes. When selecting any child restraint, keep the following points in mind: . Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. . Check the child restraint in your vehicle to be sure it is compatible with the vehicle's seat and seat belt system. . If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child's height and weight. Always follow all recommended procedures. All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on forward-facing child restraints be secured to the designated anchor point on the vehicle. SSS0801 LATCH system anchor location Lower Anchors and Tethers for CHildren System (LATCH) GUID-F078005E-1A52-4626-BFE8-ADE05DBD81B7 Your vehicle is equipped with special anchor points that are used with LATCH (Lower Anchors and Tethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint. The LATCH anchor points are provided to install child restraints in the rear outboard seating positions only. Do not attempt to install a child restraint in the center position using the LATCH Safety - Seats, seat belts and supplemental restraint system 1-23