2013 Nissan cube Owner's Manual - Page 298
2013 Nissan cube Manual
Page 298 highlights
clearances are determined using the factory equipped tire size. Other types may damage your vehicle. Use chain tensioners when recommended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and performance may be adversely affected. Tire chains must be installed only on the front wheels and not on the rear wheels. Never install tire chains on a TEMPORARY USE ONLY spare tire. Do not use tire chains on dry roads. Driving with tire chains in such conditions can cause damage to the various mechanisms of the vehicle due to some overstress. SDI1662 It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING . After rotating the tires, check and adjust the tire pressure. . Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). . Do not include the spare tire or any other small size spare tire in the tire rotation. . For additional information regarding tires, refer to "Important Tire Safety Information" (US) or "Tire Safety Information" (Canada) in the Warranty Information Booklet. CHANGING WHEELS AND TIRES GUID-01A2CC87-BFC9-4C4A-AE14-DFCD3115D3B2 Tire rotation GUID-C67DCE64-701E-43BB-94B1-117C59C801C9 NISSAN recommends rotating the tires every 7,500 miles (12,000 km). (See "Flat tire" (P.6-3) for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts must be kept tightened to the specification at all times. 8-36 Maintenance and do-it-yourself