2013 Nissan cube Owner's Manual - Page 273

CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FLUID GUID-767EC4AD-8D1A-4763-AA86-9857FAC52884 After the operation GUID-551F46DF-D4CD-412E-9649-62852684D850 1. Install the engine undercover into position as the following steps. a. Pull the center of the small plastic clips out. b. Hold the engine undercover into position. c. Insert the clips through the undercover into the holes in the frame, then push the center of the clips in to lock the clips in place. d. Install the bolts that hold the undercover in place. Be careful not to strip the bolts or over-tighten them. 2. Lower the vehicle carefully to the ground. 3. Dispose of waste oil and filter properly. children. When checking or replacement is required, we recommend a NISSAN dealer for servicing. CAUTION . . Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty. WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. Keep used engine oil out of reach of Maintenance and do-it-yourself 8-11 . .