2013 Nissan cube Owner's Manual - Page 289
2013 Nissan cube Manual
Page 289 highlights
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Front turn signal light Headlight (high-beam/low-beam) Front side marker/parking light Map light Ceiling light Front fog light (if so equipped) Side turn signal light High-mounted stop light License plate light Rear combination light (stop/tail/turn signal/ back-up light) Cargo light Rear side marker light Replacing GUID-2DD92531-B84E-4D4C-A916-2016DCEB5EBB Halogen headlight model: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. CAUTION . Do not leave the bulb out of the headlight reflector for a long period of time. Dust, moisture, smoke, etc. entering the headlight body may affect bulb performance. High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. Only touch the base when handling the bulb. Never touch the glass envelope. Touching the glass envelope could significantly affect bulb life and/or headlight performance. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact a NISSAN dealer. HEADLIGHTS GUID-F5FE6119-7912-41DE-9127-54408D527E25 Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. . . SDI2396 . Disconnect the battery negative cable before replacing bulbs. 1. Remove the connector B . cover * A * and the back C , * Use the same number and wattage as originally installed as shown in the chart. 2. Unlock the retaining spring remove the bulb. and then Maintenance and do-it-yourself 8-27