1996 Oldsmobile Silhouette Owner's Manual - Page 104

Ttrrn Signal and Lane Change Indicator Headlamp High/Low Beam Changer The turn signal has two upward (for right) and two To change the headlamps downward (for left) positions. These positions allow you from high to low beam, or to signal a turn or a lane change. low to high, simply pull the To signal a turn, move the lever all the way up or down. turn signal lever all the way is When the turn finished, the lever will return automatically. toward you. Then release it. An arrow on the instrument panel will flash in the direction of the turn or lane change. To signal a lane change, justraise or lower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. When the high beams are on, a light on the instrument As you signal a turn or a lane change, the arrows don't if cluster will also be on. flash but just stay on, a signal bulb be burned out may and other drivers won't see your turn signal. If a bulb is burned out, replace itto help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and check the fuse (see "Fuses and Circuit Breakers'' in the Index). If you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used. With this flasher installed, the signal indicator will flash even if a turn signal bulb is burned out. Check the front and rear turn signal lamps regularly to make sure they are working.