1997 Pontiac Trans Sport Owner's Manual - Page 362
1997 Pontiac Trans Sport Manual
Page 362 highlights
8. To align the parlung/turn signal lamp assembly with the headlamp assembly, lift up the parking/turn is signal lamp assembly until the upper edge contacting the fender. 9. Fasten the parkinghrn signal lamp assembly to the screw used in headlamp assembly with the thumb Step 1. Taillamps 1. Open the liftgate. 2. Remove the two screws from the taillamp housing on the inboard side. 7. To replace the lampassembly, line up and insert the tabs on the back the assembly with the slots in the of fender. Engage the lower on the frontof the clip lamp assembly, keeping upper tab the on parking/turn signallamp assembly inboard of the headlamp bracket tab. 3. Pull off the entire taillamp housing. The locatorketaining pins on the outboard side arepart of the lamp assembly and will remain intact during removal. 6-37