2013 Subaru Impreza Owner's Manual - Page 246

5-32 NOTE Audio . The Bluetooth® audio function may not operate properly under the following conditions. - The device is turned off. - The battery of the device has run down. - The device is not connected to the system. - The device is behind the seat or in the glove box. - A metal material is covering or touching the device. . Depending on the type of device that is used, operation and sound volume may be different from normal use of those devices. . The sound quality may degrade due to the influence of the device that is connected to the system or the circumstances of the Bluetooth network. . When another Bluetooth® device is simultaneously connected, noise may be heard. . AVRCP (Audio/Video Remote Control Profile) NOTE You cannot set Bluetooth® audio while driving. ! Registering (pairing) device & Setting Bluetooth® audio "MENU" button (type A audio) NOTE Only one device can be registered. 1. Select the following menu. - "PAIR AUDIO" (type A audio) - "Pair Audio Player" (type B audio) If a device is already registered, "MEMORY FULL" is displayed and the mode changes to the Bluetooth® audio setting mode. 2. After the passkey is shown on the display, input the passkey into the device. - If you input the correct passkey, "PAIRED" is displayed and the registration procedure is finished. - If you input an incorrect passkey, "FAILED" is displayed, the registration procedure was not successful and the mode changes to the Bluetooth® audio setting mode. "TUNE/TRACK/CH" dial Type A audio: 1. Select the "BT-A SETUP" menu by pressing the "MENU" button. For details, refer to "Other settings (type A audio)" F58. 2. Perform the following procedure by operating the "TUNE/TRACK/CH" dial while "BT-A" is displayed. Type B audio: 1. Select the "BT Audio Setup" menu by operating the "TUNE/TRACK/CH" dial. For details, refer to "Audio settings (type B audio)" F5-8. 2. Perform the following procedure by operating the "TUNE/TRACK/CH" dial while "BT Audio" is displayed. & Media format Bluetooth® audio devices cannot be connected if they are not compatible with the following Bluetooth® profiles. . A2DP (Advanced Audio Distribution Profile) NOTE After the ignition switch is turned to the "LOCK" position, the registered device is not automatically connected to the system even if the ignition switch is