2013 Subaru Impreza Owner's Manual - Page 44

1-18 Seat, seatbelt and SRS airbags 1. Raise the head restraint to the extended position. Do not remove the head restraint. 3. After drawing out the seatbelt, pass it through the belt guide as follows: First insert one edge of the belt into the open gap in the belt guide; then slide the rest of the belt in, so that the whole belt fits inside. 4. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 2. Remove the tongue plate from the belt holder on the right side of the cargo area and pull out the seatbelt slowly.