2013 Subaru Impreza Owner's Manual - Page 361

In case of emergency 9-13 hole until its thread can no longer be seen. Rear towing hook: 1. Take the towing hook and screwdriver out of the tool bucket. Take the jack handle out of the trunk (4-door) or cargo area (5-door). 4. Tighten the towing hook securely using the jack handle. After towing, remove the towing hook from the vehicle and stow it in the tool bucket. Fit the towing hook cover on the bumper. 3. Screw the towing hook into the thread hole until its thread can no longer be seen. WARNING . Do not use the towing hook except when towing your vehicle. . Be sure to remove the towing hook after towing. Leaving the towing hook mounted on the vehicle could interfere with proper operation of the SRS airbag system in a frontal collision. 2. Pry off the cover on the rear bumper using a screwdriver, and you will find a threaded hole for attaching the towing hook. 4. Tighten the towing hook securely using the jack handle. After towing, remove the towing hook from - CONTINUED -