2013 Subaru Impreza Owner's Manual - Page 318

7-36 Starting and operating place the ignition switch in the "LOCK" position once and then start over again. ! To deactivate 1. Park your vehicle in a flat and safe location and apply the parking brake. 2. Turn the ignition switch to the "LOCK" position. 3. Restart the engine. " / " illuminates. Hill start assist OFF indicator light Vehicle Dynamics Control OFF switch 4. Confirm the following items. . The ABS warning light " / " turns off. . The Vehicle Dynamics Control warning light " " turns off. . The Vehicle Dynamics Control OFF indicator light " " turns off. . The Brake system warning light 5. Press the Vehicle Dynamics Control OFF switch and hold it until the Vehicle Dynamics Control OFF indicator light " " on the combination meter illuminates for several seconds and then turns off. 6. Within 5 seconds after the Vehicle Dynamics Control OFF indicator light turns off, release the Vehicle Dynamics Control OFF switch. 7. Within 2 seconds after releasing the Vehicle Dynamics Control OFF switch, press the Vehicle Dynamics Control OFF switch once again. Then the Hill start assist OFF indicator light illuminates. 8. Turn the ignition switch to the "LOCK" position. The hill start assist system has now been deactivated. NOTE While the Hill start assist system is deactivated, the Hill start assist OFF indicator light illuminates continuously. ! To activate When the procedure to deactivate the Hill start assist system is performed again, the