3Com 5500-EI Getting Started Guide - Page 51
Packing and Shipping the Switch 5500, The Switch 5500G
UPC - 662705498997
View all 3Com 5500-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Packing and Shipping the Switch 5500 51 CAUTION: When installing and removing an Optional Interface Module, note that: ■ Do not exert excessive force on the module or touch the components on the module surface. ■ If you are not installing a new module, insert a blank filler panel to keep the dust out and to ensure normal ventilation within the switch. Packing and Shipping the Switch 5500 This section describes how to correctly package your Switch 5500 should you need to return the switch to 3Com. WARNING: If you are returning the unit to 3Com for repair, ensure that you fit the rear blanking plates for the PSU and module. If 3Com receives the unit without the blanking plates in place your warranty could be invalidated. WARNING: Package the unit correctly to ensure that you do not invalidate the repair. The Switch 5500G To package your Switch 5500G unit correctly: 1 For the 5500G unit, orientate your switch so that the PSU blanking plate is on the left (looking down at the top of the unit) as shown in Figure 19. 2 Secure one of the polystyrene supports to side of the unit with the PSU blanking plate, ensuring that the wider recess on the support is fitted around the blanking plate. Secure the remaining support to the opposite side of the unit in the same way. 3 Place the unit in the box with the PSU blanking plate side placed next to the cable packaging. Figure 19 Correct Orientation When Packing the Switch 5500G-EI