3Com 5500-EI Getting Started Guide - Page 92
File Distribution, Command Line Interface Switch Setup - firmware
![]() |
UPC - 662705498997
View all 3Com 5500-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
92 CHAPTER 6: UPGRADING SOFTWARE The number 1.04 will match the version number in the bootrom file, which is 01_04. If the version number of the file matches the displayed version, there is no need to download the bootrom (.btm) file. File Distribution The following commands enable you to distribute your downloaded files to the remaining switches in the fabric: 1 To copy the new software file to each switch in the fabric, enter the following from User View: copy unit1>flash:/s4a03_01_04s56.app unit2>flash:/ Replace unit2 with unit3 and so on for each switch in the fabric. 2 To copy the new default configuration file to each switch in the fabric, enter: copy unit1>flash:/3ComOScfg.def unit2>flash:/ Replace unit2 with unit3 and so on for each switch in the fabric. 3 To copy the new Web user interface file to each switch in the fabric, enter: copy unit1>flash:/s4e01_04.web unit2>flash:/ Replace unit2 with unit3 and so on for each switch in the fabric. 4 To copy the new Bootrom firmware file to each switch in the fabric, enter: copy unit1>flash:/s4e01_04.btm unit2>flash:/ Replace unit2 with unit3 and so on for each switch in the fabric. Command Line Interface Switch Setup 1 To set the switch to boot from the new software you have downloaded, enter the following: boot boot-loader unit1>flash:/s4a03_01_04s56.app To set the remaining switches in the fabric to boot from the new software, replace unit1 with unit2 and so on for each switch in the fabric. 2 To set the switch to load the new bootrom firmware, enter: boot bootrom unit1>flash:/s4e01_04.btm
![](/manual_guide/products/3com-5500ei-getting-started-guide-5f84ba3/92.png)