3Com WX2200 Hardware Installation Guide - Page 17
WXR100 LEDs, Table 4
UPC - 662705511191
View all 3Com WX2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Hardware Features 17 Table 4 WX1200, WX4400, and WX2200 Status LEDs (continued) LED MAP (WX1200 only) Appearance Solid green Alternating green and amber Solid amber Blinking amber Unlit Meaning For a MAP access point's active link, with PoE enabled, all the following are true: MAP access point has booted. MAP access point has received a valid configuration from the WX switch. Management link with a MAP access point is operational. MAP access point is booting with an image received from the WX switch. If the LED remains in this state indefinitely, the boot or configuration attempt has failed. PoE is on but no MAP access point is connected to the link. MAP is not connected or is unresponsive, or there is a PoE problem. Port is not configured as a MAP access port, or PoE is off. WXR100 LEDs Figure 5 shows the locations of the WXR100 LEDs. Table 5 describes the LEDs. Figure 5 WXR100 LEDs FN LED MAP LED 1 2 Link LED Power supply LED