3Com WX2200 Hardware Installation Guide - Page 33

Tabletop Installation, Wipe the four placement locations for the rubber feet to clear away any

Get 3Com WX2200 - Wireless LAN Controller PDF manuals and user guides
UPC - 662705511191
View all 3Com WX2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installing a WX Switch 33 5 Lift the WX switch into position in the equipment rack. WARNING: To prevent the WX switch from slipping, do not release the switch until all the rack-mount screws are tight. 6 Insert the bottom rack-mount screws into the bracket flanges to secure the WX switch to the equipment rack, then insert the top screws. 7 Do one of the following: „ If you are installing a second power supply into the switch, go to "Installing a Power Supply in a WX4400 Switch" on page 34. „ If you are ready to turn on power, go to "Powering On a WX Switch" on page 37. Tabletop Installation 1 On a clean work surface with no debris, carefully turn the WX switch upside down. 2 Wipe the four placement locations for the rubber feet to clear away any oil or dust. The location areas are marked by X's. 3 Attach the four rubber adhesive feet over the X's. 4 Turn the WX switch right-side up, and place the switch in position on the table. 5 Do one of the following: „ If you are installing a second power supply into the switch, go to "Installing a Power Supply in a WX4400 Switch" on page 34. „ If you are ready to turn on power, go to "Powering On a WX Switch" on page 37.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Installing a WX Switch
33
5
Lift the WX switch into position in the equipment rack.
WARNING:
To prevent the WX switch from slipping, do not release the
switch until all the rack-mount screws are tight.
6
Insert the bottom rack-mount screws into the bracket flanges to secure
the WX switch to the equipment rack, then insert the top screws.
7
Do one of the following:
If you are installing a second power supply into the switch, go to
“Installing a Power Supply in a WX4400 Switch” on page 34.
If you are ready to turn on power, go to “Powering On a WX Switch”
on page 37.
Tabletop Installation
1
On a clean work surface with no debris, carefully turn the WX switch
upside down.
2
Wipe the four placement locations for the rubber feet to clear away any
oil or dust. The location areas are marked by
X
’s.
3
Attach the four rubber adhesive feet over the
X
’s.
4
Turn the WX switch right-side up, and place the switch in position on the
table.
5
Do one of the following:
If you are installing a second power supply into the switch, go to
“Installing a Power Supply in a WX4400 Switch” on page 34.
If you are ready to turn on power, go to “Powering On a WX Switch”
on page 37.