3Com WX2200 Hardware Installation Guide - Page 29

Installation Requirements and Recommendations 29 Installation Hardware Table 10 lists the mounting hardware and tools required for each type of and Tools installation. Table 10 Required Mounting Hardware and Tools Mounting Option Equipment rack „ Front-mount or center-mount option for the WX4400 switch „ Front-mount option for the WX1200 and WX2200 switch Tabletop (applicable to all switch models) Required Hardware and Tools Mounting brackets Four rack-mount screws and screwdriver Note: Equipment racks vary, and the screw and screwdriver type depend on the equipment rack. Power cords Serial console cable Four adhesive rubber feet Power cord(s) Serial console cable Included with the Product Yes No Yes (one) Yes Yes Yes Yes WARNING: To reduce the risk of equipment damage, make sure the WX switch is installed so that the mechanical load on the device is evenly distributed. For example, make sure the switch is level in the equipment rack, is evenly fastened by screws on either side, and does not have a heavy object resting on one side of the switch.