3M M1700SS User Guide - Page 13
Removing the Base Cover, Releasing the Cable Connector Cover - microtouch
UPC - 511199609764
View all 3M M1700SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3M™ MicroTouch™ Display M1700SS User Guide Figure 2. Removing the Base Cover 13 Cable Connector Cover Base Cover Tabs 1. Make sure the display is in its full upright position. 2. Push in and lift up on each of the two tabs located on the left and right sides of the base cover. This action will release the base cover. 3. Slide the cover back towards you to remove. Figure 3. Releasing the Cable Connector Cover Press in tabs 4. Push in on the cable connector tabs as shown above to release from display back. Gently pull down to release tabs.
3Mâ„¢ MicroTouchâ„¢ Display M1700SS User Guide
13
Figure 2.
Removing the Base Cover
1.
Make sure the display is in its full upright position.
2.
Push in and lift up on each of the two tabs located on the left and right sides of the
base cover. This action will release the base cover.
3.
Slide the cover back towards you to remove.
Figure 3.
Releasing the Cable Connector Cover
4.
Push in on the cable connector tabs as shown above to release from display back.
Gently pull down to release tabs.
Base Cover
Tabs
Press in tabs
Cable Connector
Cover