3M M1700SS User Guide - Page 15

3M™ MicroTouch™ Display M1700SS User Guide 15 Figure 6. Disassembling the Display from Its Base for Arm Mounting Step 1 - Unlock front mechanism and disconnect all cables from the display. Step 2 -- With the unit laying face down safely and securely on a nonabrasive surface, remove the two screws connecting the name plate and support rods to the display. Lift the support rods out of the base and set aside. Step 3 -- Then remove the four screws holding the hinge in place and gently remove the base. M1700SS Display Wall-Mount Locking Mechanism CAUTION To avoid the risk of minor or moderate personal injury or damage to the monitor: • Never wall-mount the display without the locking mechanism in place. • Use an anchoring system appropriate for the weight of the product. • Consult a construction professional before attempting to hang the unit on the wall. To lock the M1700SS Display in place for wall mounting, use the locking mechanism included in a separate bag with your display. Position the monitor to 90° flat and lock the front latch in place. As an extra measure, insert the U-shaped metal retention clip into the holes in the base as indicated in the drawing below. Tighten the screw in place and your display is ready to hang securely on the wall.