3M M1700SS User Guide - Page 16
Countertop Base Mounting Option, Access to the Video Controls, Adjusting the Viewing Angle - manual
UPC - 511199609764
View all 3M M1700SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3M™ MicroTouch™ Display M1700SS User Guide 16 Figure 7. Wall-Mount Locking Mechanism Countertop Base Mounting Option Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or countertop. Use standard screws in the desktop or countertop and then slide the base plate on for a secure fit. Note: A full size template has been included in the back of this manual for your convenience. Simply tear out the template and drill directly through the holes indicated to secure your monitor to any surface. Access to the Video Controls The controls for adjusting the video display are located on the front of the M1700SS Display. These buttons let you display the on-screen menu which enables you to adjust the phase, image position, and contrast, as well as hot keys for volume, auto adjust and brightness. Make sure you have unobstructed access to the video controls once the M1700SS Display is installed. Refer to Chapter 3 for more information on these controls. Adjusting the Viewing Angle The base and support rods were designed with touch stability in mind. This innovative design keeps the monitor face stable during touch. The unit can be adjusted to any locked position from -5 up to 90 degrees from vertical. This allows for users of different heights to view the display at the angle that best suits them with no degradation in touch stability. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation.