3M M1700SS User Guide - Page 29
Maintenance and Troubleshooting
UPC - 511199609764
View all 3M M1700SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3M™ MicroTouch™ Display M1700SS User Guide 29 CHAPTER 4 Maintenance and Troubleshooting If you have a problem setting up or using your display, you may be able to solve it yourself. Before calling 3M Touch Systems, try the suggested actions that are appropriate to the problems you are experiencing with the display. You may also want to consult your video card user's manual for additional troubleshooting advice. Maintaining Your Touch Display To maintain your display and keep your display operating at peak performance: • Keep your display and sensor clean. • Adjust the display video controls. Refer to Chapter 3 for more information. • Do not install the display in a place where ventilation may be hindered. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation. Touch Sensor Care and Cleaning The touch sensor requires very little maintenance. 3M Touch Systems recommends that you periodically clean the glass touch sensor surface. Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning agent for your touch sensor. You can also use straight isopropyl alcohol. CAUTION To avoid the potentially hazardous situations associated with the use of alcohol or other solvents which may result in minor or moderate injury or property damage: • Follow all instructions and recommendations in the manufacturer's Material Safety Data Sheet and product label. • Be sure to follow solvent manufacturer's precautions and directions for use when using any solvents • It is important to avoid using any caustic chemicals on the touch sensor. Do not use any vinegar-based solutions. • Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.