ASRock ALiveDual-eSATA2 RAID Installation Guide - Page 11
Click the RAID Mode list arrow and select Striping, and leave the Stripe Size with its default
View all ASRock ALiveDual-eSATA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. 2. Boot to Windows and launch the NVRAIDMAN application. 3. Create Array and the following screen will appear. 4. Click Next and the following screen shot will appear. 5. Click the RAID Mode list arrow and select Striping, and leave the "Stripe Size" with its default value as shown in the following screen shot. 11
11
1.
G
o to the system BIOS and make sure that the drives that you want to use are RAID enabled.
2.
Boot to Windows and launch the NVRAIDMAN application.
3.
Create Array and the following screen will appear.
4.
Click Next and the following screen shot will appear.
5.
Click the RAID Mode list arrow and select Striping, and leave the “Stripe Size” with its default value as shown in the following screen shot.