Apple G3 User Guide - Page 31
Install memory and an AirPort Card.
 |
UPC - 683728095338
View all Apple G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Install memory and an AirPort Card. For detailed instructions, refer to Mac Help (see page 24). 1. Shut down your computer. Then disconnect the power adapter and phone cord. Turn the computer over and remove the battery. 2. Release the keyboard by sliding the two plastic tabs away from the display. Then lift the keyboard, flip it over, and lay it on the palm rests. 3. If necessary, remove the metal clip and pull the AirPort Card from the adapter. The adapter is not used with the iBook. . If the keyboard doesn't pop up, it may be locked. Locate the plastic tab next to the Num Lock key. Use a small flathead screwdriver to turn the screw counter-clockwise 1/2 turn. 30
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37
-
38
-
39
-
40
 |
 |
30
Install memory and an AirPort Card.
For detailed instructions, refer to Mac Help (see page 24).
2.
Release the keyboard by sliding the
two plastic tabs away from the display.
Then lift the keyboard, flip it over, and
lay it on the palm rests.
1.
Shut down your computer. Then
disconnect the power adapter and
phone cord. Turn the computer over
and remove the battery.
3.
If necessary, remove the metal clip
and pull the AirPort Card from the
adapter. The adapter is not used with
the iBook.
.
If the keyboard doesn’t pop up, it may be
locked. Locate the plastic tab next to the
Num Lock key. Use a small flathead screwdriver
to turn the screw counter-clockwise 1/2 turn.