Apple M9628LL Service Guide - Page 15
Make sure that all the tabs are seated and that the keyboard rests flush
UPC - 718908812761
View all Apple M9628LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Make sure the replacement keyboard is firmly seated: • Flip the keyboard back toward the keyboard opening in the case. • Hold the keyboard at a 45-degree angle above the keyboard opening, and insert the tabs on the bottom edge of the keyboard into the slot under the edge of the opening. • Important: Make sure that all the tabs are seated and that the keyboard rests flush against the edge of the opening. • Lay the keyboard flat into the keyboard opening. • Pull down on the keyboard release tabs and then press down on the top portion of the keyboard. Keyboard and RAM Shield iBook G4 (14.1 LCD) Take Apart - 14
iBook G4 (14.1 LCD) Take Apart -
14
Keyboard and RAM Shield
Make sure the replacement keyboard is firmly seated:
•
Flip the keyboard back toward the keyboard opening in the case.
•
Hold the keyboard at a 45-degree angle above the keyboard opening, and insert
the tabs on the bottom edge of the keyboard into the slot under the edge of the
opening.
•
Important:
Make sure that all the tabs are seated and that the keyboard rests flush
against the edge of the opening.
•
Lay the keyboard flat into the keyboard opening.
•
Pull down on the keyboard release tabs and then press down on the top portion of
the keyboard.