Apple M9628LL Service Guide - Page 5
Tools, Serial Number Location
UPC - 718908812761
View all Apple M9628LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Note: The metal EMI shields-bottom shield and top shield-are now marked with screw identifiers for most of the screw locations. The screw identifiers are in the form of "M2x_" where the last digit indicates the approximate screw length. For example, a marking of "M2x3" indicates a 3.5-mm long screw, and a marking of "M2x14" indicates a 14.5-mm long screw. Use the identifiers as a guide when reassembling the computer. Tools The following tools are recommended for the Take Apart procedures: • Coin • ESD wriststrap and mat • Magnetized #0 Phillips screwdriver • Jeweler's flat-blade screwdriver • Small soft cloth • Torx T8 screwdriver • 2.0 mm hex nut driver • Needlenose pliers • Torx T6 screwdriver • 5/32 hex driver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the assembly, use a tray with divided compartments (such as a plastic ice cube tray). Serial Number Location In this computer, the product serial number is located in two places: the battery bay and the top case underneath the keyboard. General Information iBook G4 (14.1 LCD) Take Apart - 4