Apple M9628LL Service Guide - Page 157
The computer runs when plugged into a wall outlet but not on battery power
![]() |
UPC - 718908812761
View all Apple M9628LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
present, and all of its contents. You will also need to reset the date and time (using the Date & Time control panel). 4. Replace DC board. 5. Replace logic board. Related article: 88133: iBook (Dual USB): Using PowerBook G4 Adapter The computer runs when plugged into a wall outlet but not on battery power 1. Reseat battery to verify battery is seated correctly with battery lock engaged. 2. Try known-good charged battery. 3. Reset the power manager by pressing the key combination Control-Option-Shift- power. Warning: Make sure you do not hold down the "fn" key when resetting the power manager. Warning: Resetting the power manager will permanently remove a RAM disk, if present, and all of its contents. You will also need to reset the date and time (using the Date & Time control panel). 4. Replace battery transfer board. 5. Replace logic board. The cursor does not move when you are using trackpad 1. Verify that no USB device is connected. 2. Boot from a Mac OS system CD to verify that it is not a software problem. 3. Reset the power manager by pressing the key combination Control-Option-Shift- power. Warning: Make sure you do not hold down the "fn" key when resetting the power manager. Warning: Resetting the power manager will permanently remove a RAM disk, if present, and all of its contents. You will also need to reset the date and time (using the Date & Time control panel). 4. Check trackpad cable and connection to the logic board (see separate Top Case replacement instructions for location under RAM shield). 5. Replace top case. 6. Replace logic board. Symptom Charts iBook G4 (14.1 LCD) Troubleshooting - 11
![](/manual_guide/products/apple-m9628ll-service-guide-1d088a1/157.png)