Apple M9628LL Service Guide - Page 48

shows no raised surfaces and is fully snapped into place before installing

Get Apple M9628LL - iBook G4 - PowerPC 1.33 GHz PDF manuals and user guides
UPC - 718908812761
View all Apple M9628LL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

14. Install the replacement top case, and reassemble and test the computer. Note: When installing the replacement top case, connect the power switch cable connector (the shorter cable) first. Then connect the speaker cable connector. Do not strain the cables. Replacement Note: The trackpad cable (orange flex cable) is barely visible underneath the lower center of the keyboard well. When the top case is removed, the trackpad cable is automatically disconnected from the logic board. However, when installing the top case, make sure the trackpad cable is installed securely on the logic board connector pins under the case. Use the connector pull tab and a black stick or needlenose pliers to carefully position the trackpad cable onto the pins. Warning: When reassembling the computer, be careful not to pinch any cables as you press the top case back onto the computer. Check that the top case shows no raised surfaces and is fully snapped into place before installing the remaining screws. 47 - iBook G4 (14.1 LCD) Take Apart Top Case

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
47 -
iBook G4 (14.1 LCD) Take Apart
Top Case
14.
Install the replacement top case, and reassemble and test the computer.
Note:
When installing the replacement top case, connect the power switch cable
connector (the shorter cable) first. Then connect the speaker cable connector. Do not
strain the cables.
Replacement Note:
The trackpad cable (orange flex cable) is barely visible
underneath the lower center of the keyboard well. When the top case is removed, the
trackpad cable is automatically disconnected from the logic board. However, when
installing the top case, make sure the trackpad cable is installed securely on the logic
board connector pins under the case. Use the connector pull tab and a black stick or
needlenose pliers to carefully position the trackpad cable onto the pins.
Warning:
When reassembling the computer, be careful not to pinch any cables
as you press the top case back onto the computer. Check that the top case
shows no raised surfaces and is fully snapped into place before installing the
remaining screws.