Arlo Wire-Free User Manual - Page 16
Position Mode
View all Arlo Wire-Free manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Set Up Your System Position Mode Position mode is available only when the camera is not streaming, recording motion, or in a motion detection mode. ¾¾ To place your camera in Position mode: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter arlo.netgear.com in the address bar of a browser. If you are using a mobile device that supports a Touch ID fingerprint identity sensor, you are prompted to enable Touch ID or skip. 2. Tap the gear icon for the camera feed on your mobile device. The Settings page displays. 3. Tap or click Position Mode. Note: If Position Mode is grayed out and you cannot tap it, the camera might be in Armed mode or another motion detection mode. To stop motion detection, tap Mode, and then select Disarmed for the camera. The camera starts streaming video. In Position mode, the camera streams video as fast as possible, without buffering, so that you can aim the camera while watching on a smartphone and make near-real-time adjustments. This means that you might see lower-quality video while the camera is in Position mode. 4. Adjust the camera position as needed. 5. If you selected the Disarmed mode for the camera and now you want the camera to detect motion again, tap Mode and select the desired mode. 16