Asus M4A78T-E User Manual - Page 48
SB750 Southbridge Serial ATA connectors 7-pin SATA1-5, OnChip - bios version
UPC - 610839169559
View all Asus M4A78T-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. AMD® SB750 Southbridge Serial ATA connectors (7-pin SATA1-5) These connectors are for the Serial ATA signal cables for Serial ATA hard disk and optical disk drives. If you install SATA hard disk drives to the SATA1-5 connectors, you can create a RAID 0, RAID 1, RAID 5, RAID 10 or JBOD configuration through the onboard AMD® SB750 controller. These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID set using these connectors, set the Onchip SATA Type item in the BIOS to [RAID]. Chapter 2 2-28 Install the Windows® XP Service Pack 1 or later version before using Serial ATA. • For detailed instructions on how to configure RAID 0, RAID 1, RAID 5 and RAID 10, refer to the RAID manual in the support DVD. • If you intend to create a Serial ATA RAID set using these connectors, set the OnChip SATA Type item in the BIOS to [RAID]. Chapter 2: Hardware information