Asus M4A78T-E User Manual - Page 52
Chassis intrusion connector 4-1 pin CHASSIS
UPC - 610839169559
View all Asus M4A78T-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Chapter 2 2-32 Chapter 2: Hardware information
2-32
Chapter 2: Hardware information
Chapter 2
10.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of
the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch
sends a high-level signal to this connector when a chassis component is removed or replaced. The
signal is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove
the jumper caps only when you intend to use the chassis intrusion detection feature.