Asus M4A78T-E User Manual - Page 69
Storage Configuration - raid setup
UPC - 610839169559
View all Asus M4A78T-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
32Bit Data Transfer [Enabled] [Enabled] Sets the IDE controller to combine two 16-bit reads from the hard disk into a single 32-bit double word transfer to the processor. This makes more efficient use of the PCI bus as fewer transactions are needed for the transfer of a particular amount of data. [Disabled] Disables this function. 3.4.2 Storage Configuration The Storage Configuration menu allows you to configure your storage devices. Select an item then press to display the submenu. Main BIOS SETUP UTILITY OnChip SATA channel OnChip SATA Type [Enabled] [IDE] Options OnChip SATA Channel [Enabled] [Enabled] Enables the onboard channel SATA port. [Disabled] Disables the onboard channel SATA port. The following item appears only when you enable OnChip SATA Channel. OnChip SATA Type [IDE] Allows you to set the SATA configuration. This item appears only when you enable the OnChip SATA Channel item. [IDE] [RAID] [AHCI] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. Set to [AHCI] mode when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. When this item is set to [AHCI], only SATA connectors 1-4 can be detected. Ensure that you've installed the AHCI driver, so that you could use SATA connectors 1-5 and E-SATA connector in AHCI mode under OS. Chapter 3 ASUS M4A78T-E 3-11