Asus P4P800-E DELUXE P4P800-E Deluxe User's manual for English Version E1867 - Page 132
Creating a RAID 0 array Performance - driver
View all Asus P4P800-E DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
5.6.3 Creating a RAID 0 array (Performance) 1. In the FastBuild™ utility main menu, press to select Auto Setup. The following screen appears. FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc. [ Auto Setup Options Menu ] Optimize Array for: Performance [ Array Setup Configuration ] Mode Stripe Spare Drive 0 Drive(s) Used in Array 2 Array Disk Capacity (size in MB 8650 [ Keys Available ] [ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save 2. Use the arrow keys to go to the field Optimize Array for and select Performance using the space bar. The Mode field displays Stripe. 3. After making a selection, press to save and create a RAID 0 array. 4. Press any key to reboot the system. During the boot process, the MBFastTrak378 BIOS checks and displays the disk array information. 5. Once the array is created, use the FDISK utility to format the array as a single hard drive. 6. After you have formatted the arrayed drives, install an operating system (OS). The OS will treat the RAID 0 array as a single drive unit. During the OS installation, the system prompts you to install third-party SCSI or RAID driver. Refer to section "5.8 Creating a floppy with RAID driver" for details. 5-22 Chapter 5: Software support