Asus P4P800-E DELUXE P4P800-E Deluxe User's manual for English Version E1867 - Page 57

14. Chassis intrusion connector (4-1 pin CHASSIS) This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. CHASSIS +5VSB_MB Chassis Signal GND ® P4P800-E P4P800-E Chassis Alarm Lead (Default) 15. System panel connector (20-pin PANEL) This connector accommodates several system front panel functions. Power LED Speaker Connector PLED+ PLED+5V Ground Ground Speaker IDE_LED+ IDE_LED- ExtSMI# Ground PWR Ground Reset Ground ® P4P800-E IDE_LED SMI Lead Reset SW ATX Power Switch* * Requires an ATX power supply. P4P800-E System Panel Connectors • System Power LED Lead (Green 3-1 pin PLED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode. ASUS P4P800-E Deluxe motherboard 2-35