Asus P4P800-E DELUXE P4P800-E Deluxe User's manual for English Version E1867 - Page 85
IDE Detect Time Out [35]
View all Asus P4P800-E DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
The P-ATA+S-ATA and P-ATA options are for advanced users only. If you set to any of these options and encounter problems, revert to the default setting S-ATA. Configuration options: [P-ATA+S-ATA] [S-ATA] [P-ATA] The Enhanced Mode Support On appears only when the item Onboard IDE Operate Mode is set to Enhanced Mode. IDE Port Settings [Primary P-ATA+S-ATA] Allows selection of the IDE ports to activate if you are using a legacy operating system. Set to [Primary P-ATA+S-ATA] if you wish to use the primary Parallel ATA and Serial ATA ports, or set to [Secondary P-ATA+SATA] to enable the secondary P-ATA port instead. Setting to [P-ATA Ports Only] disables the two Serial ATA ports supported by ICH5. Configuration options: [Primary P-ATA+S-ATA] [Secondary P-ATA+S-ATA] [P-ATA Ports Only] The IDE Port Settings appears only when the item Onboard IDE Operate Mode is set to Compatible Mode. Configure S-ATA as RAID [No] This field configures the S-ATA to function as an IDE controller or RAID. Configuration options: [Yes] [No] Serial ATA BOOTROM [Enabled] This field enables or disables the Serial ATA boot ROM. Configuration options: [Disabled] [Enabled] The Serial ATA BOOTROM item appears only when the item Configure S-ATA as RAID is set to [Yes]. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] ASUS P4P800-E Deluxe motherboard 4-15