Behringer DEEPMIND 6 Manual - Page 101
RoomRev ROOM REVERB, VintageRev VINTAGE ROOM REVERB
View all Behringer DEEPMIND 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
101 DeepMind 6 User Manual RoomRev (ROOM REVERB) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1 PRE PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal. 2* DCY Decay s 0.3 s 28.9 s Controls the amount of time it takes for the reverb to dissipate. 3 SIZ Size m 4.0 m 76.0 m Controls the perceived size of the space being created by the reverb. 4* DMP Damping Hz 1000 Hz 20000 Hz Adjusts the decay of the high frequencies within the reverb tail. 5 DIF Diffusion % 0.0% 100% Controls the initial reflection density. 6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies affected by the reverb to be reduced. 8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies affected by the reverb to be reduced. 9* LFX BassMult -- 0.2 4.0 Controls the low frequency build-up. 10 SPR Spread -- 0.0 50.0 Emphasizes the stereo effect of the reverb. 11* SHP Shape -- 0.0 250.0 Adjusts the contour of the reverberation envelope. 12 SPI Spin % 0.0% 100% Controls randomization / modulation effects within the reverb. * These parameters are available as modulation destinations in the Modulation Matrix VintageRev (VINTAGE ROOM REVERB) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1 PRE PreDelay ms 0.0 200.0 ms Controls the amount of time before the reverb is heard following the source signal. 2 SIZ Size % 1.0% 100% Controls the perceived size of the space being created by the reverb. Affects DECAY range. 3* DCY Decay s 0.1 s 20.7 s Controls the amount of time it takes for the reverb to dissipate. Range dependant on SIZE. 4* LFX Lo Mult -- 0.1 10.0 Controls the low frequency build-up. 5* HFX Hi Mult -- 0.1 10.0 Controls the high frequency build-up. 6* DEN Density % 0.0% 100% Manipulates the reflection density in the simulated room. 7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies affected by the reverb to be reduced. 8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies affected by the reverb to be reduced. 9* ERL ER Level % 0.0% 100% Set the early reflection times. 10 ERD ER Delay ms 0.0 200.0 ms Sets the loudness of the early reflection level. 11* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 12* FRZ Freeze -- OFF ON Applies freeze mode and blends signals into a continuous response. * These parameters are available as modulation destinations in the Modulation Matrix