Behringer DEEPMIND 6 Manual - Page 159
Appendix 4 - Default Program
View all Behringer DEEPMIND 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
159 DeepMind 6 User Manual 27. Appendix 4 - Default Program The following screenshots show the settings used for the "Default program" which you can use as a starting point for creating your own favorite programs. The following procedure shows how to call up the default program (as previously described in this manual): 1. Press and hold the PROG switch and the help menu will appear. 5. Now that this default program is loaded, you can use it for a base from which to create your own programs. It has simple settings, with none of the following: Modulation Matrix, FX, Arpeggiator, Patterns, or Control Sequencer. You can add these in as you build up your sounds. Default Program Settings The COMPARE switch allows you to see the settings of the faders. The lower line of numbers below the faders (on a black background with white text) are the stored fader values for the default program. The values in black text are the current position of the faders. COMPARE PAGE 1 2. While PROG is held, press the COMPARE switch and the default program will be loaded. COMPARE PAGE 2 3. Press the WRITE switch to save this program. You can either save over an existing program (such as B-16 above), or choose another location. COMPARE PAGE 3 4. The default program will appear, without the asterisk*, showing it has been saved. COMPARE PAGE 4