Behringer DEEPMIND 6 Manual - Page 113
Moddlyrev Modulation/delay/reverb, Chorus Stereo Chorus
View all Behringer DEEPMIND 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
113 DeepMind 6 User Manual ModDlyRev (MODULATION/DELAY/REVERB) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1 TIM Time ms 1.0 ms 1500.0 ms Sets the master delay time. Time synchronised options from 4 to 1/64 bars. 2 FAC Factor -- - Sets the delay to rhythmic fractions (1, 1/2, 2/3, 3/2). 3* FBK Feedback % 0.0% 100% Controls the percentage of positive feedback. 4* FHC FeedHC Hz 200.0 Hz 20000.0 Hz Adjusts the high cut filter frequency in the feedback path. 5* DEP Depth % 0.0% 100% Controls the depth (amount) of modulation. 6* SPD Speed Hz 0.0 Hz 10.0 Hz Adjusts the rate of the modulation. Time synchronised options from 4 to 1/64 bars. 7 MOD Mode - PAR SER Controls the processor chain routing (Serial/Parallel) 8 RTY Rtype -- - Reverb Type can be set to AMB (Ambience), CLUB, or HALL. 9* DCY Decay - 1.0 10.0 Controls the amount of time it takes for the reverb to dissipate. 10* DMP Damping - 1000 Hz 20000 Hz Determines the decay of high frequencies within the reverb tail. 11* BAL Balance - -100.0 100.0 Adjusts ratio of the delay signal to the reverb signal. 12* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals * These parameters are available as modulation destinations in the Modulation Matrix Chorus (STEREO CHORUS) No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION 1* SPD Speed Hz 0.0 Hz 5Hz Sets the modulation speed. Time synchronised options from 4 to 1/64 bars. 2* WDL WidthL % 0.0% 100% Determines the amount of modulated delay in the left channel. 3* WDR WidthR % 0.0% 100% Determines the amount of modulated delay in the right channel. 4 DLL DelayL ms 0.5 ms 50.0 ms Sets the total amount of delay for the left channel. 5 DLR DelayR ms 0.5 ms 50.0 ms Sets the total amount of delay for the right channel. 6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies in the signal to be reduced. 8* HC Hi Cut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies in the signal to be reduced. 9 PHS Phase - 0.0 100.0 Adjusts the phase offset of the LFO between left and right channel. 10 WAV Wave % 0.0% 100% Blends between the digital triangular chorus sound and the classic analog sine wave. 11* SPR Spread % 0.0% 100% Adjusts how much of the left channel is mixed into the right and vice versa. * These parameters are available as modulation destinations in the Modulation Matrix