BenQ SP870 SP870 User Manual - Page 47

Resetting the lamp timer, SYSTEM SETUP: Advanced, Settings, ENTER, Lamp Settings, Reset Lamp Timer

Get BenQ SP870 - XGA DLP Projector PDF manuals and user guides
UPC - 840046019181
View all BenQ SP870 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

English 6. As shown in the figure, hold the new lamp and 11. Restart the projector. align the two locators on the lamp with the holes on the projector, and then insert the lamp all the Do not turn the power on with the lamp cover removed. way into the projector. Resetting the lamp timer 12. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press ENTER and the Lamp Settings page displays. 7. Tighten the screw that secures the lamp. Highlight Reset Lamp Timer. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press ENTER on the projector or remote control. The lamp time will be reset to '0'. Notice Reset Lamp Timer? Loose screw may cause a bad connection, which could result in malfunction. Do not over tighten the screw. 8. Ensure the handle is fully laid flat and locked in place. 9. Replace the lamp cover on the projector. Reset Cancel Do not reset if the lamp is not new or replaced as this could cause damage. 10. Tighten the screw that secures the lamp cover. Loose screw may cause a bad connection, which could result in malfunction. Do not over tighten the screw. Maintenance 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
47
Maintenance
English
6.
As shown in the figure, hold the new lamp and
align the two locators on the lamp with the holes
on the projector, and then insert the lamp all the
way into the projector.
7.
Tighten the screw that secures the lamp.
Loose screw may cause a bad connection,
which could result in malfunction.
Do not over tighten the screw.
8.
Ensure the handle is fully laid flat and locked in
place.
9.
Replace the lamp cover on the projector.
10.
Tighten the screw that secures the lamp cover.
Loose screw may cause a bad connection,
which could result in malfunction.
Do not over tighten the screw.
11.
Restart the projector.
Do not turn the power on with the lamp cover
removed.
Resetting the lamp timer
12.
After the startup logo, open the On-Screen
Display (OSD) menu.
Go to the
SYSTEM SETUP: Advanced
>
Lamp
Settings
menu.
Press
ENTER
and the
Lamp Settings
page
displays.
Highlight
Reset Lamp Timer
. A warning message
displays asking if you want to reset the lamp
timer.
Highlight
Reset
and press
ENTER
on the
projector or remote control. The lamp time will
be reset to '0'.
Do not reset if the lamp is not new or replaced
as this could cause damage.
Reset Lamp Timer?
Reset
Cancel
Notice