BenQ WDC10 User Manual - Page 16

For table placement, Connecting the HDMI cable and power

Get BenQ WDC10 PDF manuals and user guides View all BenQ WDC10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

• Avoid positioning the antennas in a horizontal manner, this may result in a weak signal reception: • If the InstaShow Host is attached to a metallic ceiling mount ensure that the antennas are at least 3 cm away from the metal portion of the ceiling mount: 3 cm 3 cm For table placement Position the antennas so that they are both pointed upwards roughly perpendicular to the table: Connecting the HDMI cable and power Once the InstaShow Host has been positioned properly near the display, connect the HDMI cable and power to ensure signal transmission. To supply power to the InstaShow Host, do one of the following. Assemble the adapter. See Assembling the adapter on page 17 for details. • Some BenQ projector models may be equipped with a USB type A jack (5V/1.5A) to provide power supply to the InstaShow Host. See Power supply via a USB type A jack (5V/1.5A) on page 18 for details. • For display models without a USB type A jack (5V/1.5A) for power supply, see Power supply via a power adapter on page 19 for details. 16 Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
16
Installation
• Avoid positioning the antennas in a horizontal manner, this may result in a weak signal reception:
• If the InstaShow Host is attached to a metallic ceiling mount ensure that the antennas are at least 3
cm away from the metal portion of the ceiling mount:
For table placement
Position the antennas so that they are both pointed upwards roughly perpendicular to the table:
Connecting the HDMI cable and power
Once the InstaShow Host has been positioned properly near the display, connect the HDMI cable and
power to ensure signal transmission.
To supply power to the InstaShow Host, do one of the following.
Assemble the adapter. See
Assembling the adapter on page 17
for details.
• Some BenQ projector models may be equipped with a USB type A jack (5V/1.5A) to provide power
supply to the InstaShow Host. See
Power supply via a USB type A jack (5V/1.5A) on page 18
for
details.
• For display models without a USB type A jack (5V/1.5A) for power supply, see
Power supply via a
power adapter on page 19
for details.
3 cm
3 cm