Home » BenQ Manuals » Wireless » BenQ WDC10 » Manual Viewer

BenQ WDC10 User Manual - Page 20

If you purchase an additional InstaShow Button via an InstaShow Button Kit, please follow

Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

2. The LED indicator of the InstaShow Button will turn red while the InstaShow Button is starting up. 3. When the InstaShow button is ready to present, the LED indicator will turn green. Press the Present key when the LED indicator turns green. • Handle the InstaShow Button cable with care. Rough handling might cause defects. • Pull/Push the plug instead of the cable when inserting or removing InstaShow Buttons. If you purchase an additional InstaShow Button (via an InstaShow Button Kit), please follow the process described below: 1. Connect the InstaShow Button's HDMI and USB jacks to the corresponding inputs of a laptop. See the illustration. HDMI 1.4 USB 3.0 MODE 20 Installation

Section	Page
Copyright	2
Disclaimer	2
BenQ ecoFACTS	2
Introduction	5
Product features	5
Package content	6
Product specification	7
Overview	8
InstaShow Button	8
InstaShow Host	8
LED indicators of the InstaShow Button and InstaShow Host	9
Installation	10
Environment check	10
Assembling the InstaShow Host	11
Setting up the InstaShow Host	11
Attaching the InstaShow Host to the ceiling	11
Attaching the InstaShow Host to a ceiling mount	11
Placing the InstaShow Host on a table	12
Installing the InstaShow Host on the wall or trolley	14
Positioning the InstaShow Host antennas	15
For ceiling installation	15
For ceiling mount installation	15
For table placement	16
Connecting the HDMI cable and power	16
Assembling the adapter	17
Connecting the HDMI cable	18
Power supply via a USB type A jack (5V/1.5A)	18
Power supply via a power adapter	19
LAN connection	19
Setting up and powering an InstaShow Button	19
Using Cable USB A(F) to USB A(M)	22
Pairing a InstaShow Button and InstaShow Host	23
When the InstaShow Host is placed on a table	23
Waking up the InstaShow Host	26
Storing InstaShow Buttons in the cradle	26
Resetting a InstaShow Host	26
Resetting a InstaShow Button	27
Starting and stopping presentations	30
Getting ready	30
Starting presentation	30
Idle presentation	32
Play video with InstaShow™	33
Web management	35
Accessing the web management interface	35
Logging into the web management interface via direct connection	35
Logging into the web management interface via LAN	37
Logging into the web management interface via a wireless network	38
Getting started	39
Top command buttons	39
Change language	39
Logging out	39
Main column	40
Function bar	40
Information	40
WAN	41
Wireless Network	42
Pairing	45
Advance Setting	48
Scheduling	54
Tool	55
Legal Announcement	58

Match case Limit results 1 per page

Installation

The LED indicator of the InstaShow Button will turn red while the InstaShow Button is starting

up.

When the InstaShow button is ready to present, the LED indicator will turn green. Press the

Present key when the LED indicator turns green.

If you purchase an additional InstaShow Button (via an InstaShow Button Kit), please follow the

process described below:

Connect the InstaShow Button’s HDMI and USB jacks to the corresponding inputs of a laptop. See

the illustration.

• Handle the InstaShow Button cable with care. Rough handling might cause defects.

• Pull/Push the plug instead of the cable when inserting or removing InstaShow Buttons.

USB

3.0

HDMI

1.4

MODE