BenQ WDC10 User Manual - Page 41

WAN, and you will see the default

Get BenQ WDC10 PDF manuals and user guides View all BenQ WDC10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

information from RX Resolution. If the source connection is made but the device is not presenting, it shows Disconnect in RX Resolution. You can enter messages under Screen Message. After filling in a message, press Apply to proceed. Your message will be shown on the upper right corner of Guide/Idle Screen above SSID. For Screen Message, the maximum lines allowed are 3, and the maximum number of characters allowed per line is 19. WAN Click WAN and you will see the default WAN IP Address of the InstaShow Host. The default connection type is DHCP. Acquire the IP Address from your DHCP server of your network. If you want to change your WAN IP Address, choose Static IP under WAN Connection Type. You can input your domain name service (DNS) manually. If the information in DNS shows 0.0.0.0, it means the system gets DNS IP address automatically from the server. Press Apply to proceed. Web management 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
41
Web management
information from
RX Resolution
. If the source connection is made but the device is not presenting,
it shows
Disconnect
in
RX Resolution
.
You can enter messages under
Screen Message
. After filling in a message, press
Apply
to proceed.
Your message will be shown on the upper right corner of Guide/Idle Screen above SSID.
WAN
Click
WAN
and you will see the default
WAN IP Address
of the InstaShow Host. The default
connection type is DHCP. Acquire the IP Address from your DHCP server of your network. If you
want to change your
WAN IP Address
, choose
Static IP
under
WAN Connection Type
. You
can input your domain name service (DNS) manually. If the information in
DNS
shows
0.0.0.0
, it
means the system gets DNS IP address automatically from the server. Press
Apply
to proceed.
For
Screen Message
, the maximum lines allowed are 3, and the maximum number of characters allowed per line
is 19.