BenQ WDC10 User Manual - Page 30
Starting and stopping presentations, Getting ready, Starting presentation
![]() |
View all BenQ WDC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Starting and stopping presentations This section will guide you on how to start and stop a presentation using InstaShow™. Getting ready Make sure that all the connected devices have been powered on and ready for the presentation. As your InstaShow™ could work with different projectors, IFPs, TVs, or monitors with standard HDMI ports, the steps required to start a presentation may vary according to the actual environment and your display specifications. Follow the procedures below and refer to the specified sections for details. 1. To start a presentation, see Starting presentation on page 30 for details. 2. To stop a presentation, see Idle presentation on page 32 for details. 3. To learn more about InstaVideo, see Play video with InstaShow™ on page 33 for details. Starting presentation 1. Make sure power is supplied to the InstaShow Host. See Connecting the HDMI cable and power on page 16 for more information. 2. Choose the HDMI source corresponding to the InstaShow Host on the display. You will see the Guide screen. Guide Screen Depending on the purchased model, you may have different cable(s) on InstaShow Buttons. Connect the InstaShow Button's jack(s) to the corresponding input(s) of a laptop. 30 Starting and stopping presentations
![](/manual_guide/products/benq-wdc10-user-manual-d478128/30.png)